Are you dealing with a broken furnace in Tampa? If so, you are not alone! Furnace Repair Tampa is an issue that many homeowners face during the winter months. Thankfully, there are some steps you can take to get your furnace back up and running, and this blog post will discuss how to fix a broken furnace. Read on to learn more about Furnace Repair Tampa and how to get your home comfortable again!
Check the thermostat
The first step when it comes to diagnosing and fixing your furnace is to check the thermostat. If your thermostat is not set correctly, then it could be the cause of your furnace troubles. Make sure the temperature setting is appropriate for the time of year and the type of heating system you have. You should also check to make sure the thermostat is not in its “cool” mode. If none of these measures help to resolve the issue, it might be time to call a professional heating technician, like Water Heater Tampa, to take a look at the furnace and help you get it running again.
Clean or replace the furnace filter
The furnace filter should be checked on a regular basis and replaced every one to three months, or as recommended by your manufacturer. If the filter looks dirty or clogged, it’s time for a replacement. Clean filters allow air to flow freely through the system, helping to keep your furnace running efficiently and providing better air quality for your home. To replace the filter, turn off power to the furnace and locate the filter housing. Open the access panel and remove the old filter. Replace it with a new one, making sure it fits snugly in the housing. If you are having trouble finding the correct size filter, contact a Water Heater Tampa specialist who can provide assistance.
Inspect the blower belt
One of the most important steps in furnace repair Tampa is inspecting the blower belt. The blower belt helps move hot air throughout your home, and if it is not working properly, then you could be facing an inefficient heating system. To inspect the blower belt, make sure to check that it is free from cracks or other damage, and that it has the proper tension. If you find any signs of wear or damage, then it is important to replace the belt immediately. You should also inspect the surrounding components of the furnace, such as the water heater Tampa, for signs of wear or damage. If you find any issues, then it is best to contact a professional to help with furnace repair Tampa.
Lubricate the blower motor
It is important to keep your furnace running in peak condition, and one way to do this is to lubricate the blower motor. This is a relatively easy process that requires some basic tools and supplies. First, you will need some lubricant specifically designed for motors. You can purchase this from any home improvement store such as Home Depot or Lowe’s. Once you have the lubricant, turn off the power to the furnace. Then, locate the motor housing. Most blower motors have a small port for lubrication. With the power still off, insert the lubricant into the port and move the motor shaft by hand until it has been completely covered with the lubricant. Be sure to read any instructions included with your lubricant, as they may vary. Once you are finished, turn the power back on and test your furnace to make sure it is working properly. If you are having any issues with your furnace, it is best to call a professional Water Heater Tampa technician to inspect it.
